China best Mining Belt Conveyor Drive Pulley Drum Pulley with SGS engine pulley

Product Description

Product Description

The drum directly was made by large seamless steel:

We precisely cut the tube by using the flame cutting machine, and weld the inner pulley disc by using the professional pulley welding machine, and weld the pulley sleeve and disc by using the positioner. We use the large drum lathe process the outside circle, so that it ensures the pulley has the uniform thickness and small pulsation. We choose 45# round steel and sleeve and process the whole shaft so that it ensures shaft concentricity and reduction for the eccentric shaft force. It make sure the pulley move more stable, high quality bearing which is hot charging and bearing block are equipped inner bearing enlargement device, so the bearing can be easily pushed to the bearing position and it avoids the bearing damage from the beating. We need make the eliminating inner stress treatments when the pulley’s withstand forces exceed 80KN and we will make the static balance inspection when the belt speed exceeds 2.5m/s.

Producing different standards pulley: production scope diameter: 114mm-2400mm, length: 260mm-3400mm

We can produce different type, different quality, different standard pulley according to the customers requests.

Detailed Photos

Description Fabrication Services flat belt idler pulley for belt conveyor
Application Used in electric power, metallurgy,mine,coal, cement,steel,chemical, port, hydroelectric power and grain industries
Pipe/Tube/Shell 1)Material:Q235 Steel
2)Diameter:219mm-3000mm
3)Length:500mm-5000mm,depends on the belt width of the conveyor
Shaft/Axis Material:#45 Steel
Bearing Big roving crack, deep groove ball with double sealing
Welding Pipe and bearing housing with automatic welding
Surface Smooth steel color surface,  rubber lagging surface
Color Red,green,blue or as require
Service life More than 30,000 hours
Standard GB,ISO,DIN,CEMA,JIS

Packaging & Shipping

 

Company Profile

HangZhou CZPT Conveying Machinery Co, Limited was found in May, 2005. It registered capital is 11.68 million CNY. It is a private enterprise of stock holding system. It is located in economic and technological development zone of Xihu (West Lake) Dis. town. We can produce CZPT Brand TD75, DT II, DT IIA fixed belt conveyor, mobile lifting belt conveyor, enviromental protection belt conveyor, sluge belt conveyor, mine belt conveyor, farming belt conveyor, farming belt conveyor, workshop line, large dip angle belt conveyor, roller conveyor, roller and pulley. We have special belt conveyor designer team. We have been granted industrial production licenses, Quality certification, trademark with reputation. It is improved CZPT brand. We supply our products to home and abroad machinery factories. Also supply best price to our dealers’ and trading company. And we have independent export authority. According to different requirements of domestic and foreign customers’ drawings, we can produce German DIN standard , Australian AS standard, Japanese JIS standard, American CEMA standard, South African SANS-SABS standard, Russian Gost standard, French AFNOR standard, etc. Products are exports to the Middle East, Africa, America, Australia, Europe, Southest Asia, Russia and other countries and regions.

There are large-scale lathe, CNC machine, double pressing machine, double welding machine, double boring machine, milling machine, professional equipments machines. We can produce 50 CZPT belt conveyor, 20 pieces drum, 500 sets bracket, we can produce 2000 pieces roller per day and 700 thousand rollers per year. We choose SRB brand bearing and special tube , cold-drawing shaft and special housing and labyrinth seals. The professional inspectors use testing equipment to examine the roller of the effects for waterproof, preventing static electricity sideway, moving up and down, revolving resistance and falling test. The examine result is that the qualified rate of the rollers is over 98%. The noise of the rollers is very low and its running is very nimble. The life of the rollers is over 30000 hours, and the products are praised by our customers. Our roller are widely used in coal mine, mines, ports, steel plants, fertilizer plants, animal feed factory, cement big small and medium enterprises.

Our company pursues that credit is as aim and quality is the most important. We requests to live and develop with quality and credit. Strength the inner management and improve the quality of the products constantly. Offer the best products for customers from the beginning to the end. At the same time, provide the best service for customers.

Our Advantages

What kinds of Conveyor Pulleys we can manufacture:

Conveyor head pulley, Conveyor drive pulley, Conveyor bend pulley, Conveyor Tail Pulley
Conveyor tension pulley, Conveyor snub Pulley, Conveyor CZPT Pulley, Conveyor take up Pulley and so on Our workshop

Advantage:
The life time: More than 30000 hours
Samples for testing are available.
The more relaxed payment terms

Detailed conveyor roller idler feature:
1. Roller idlers Dia 50mm-219mm, length 190-3400mm, which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc
2. Tube: Q235
3. Shaft: 45# STEEL
5. Bearing: Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 clearance.

6. Seals: Grease retaining inner seal with Multi-stage Labyrinth and Retention Cap with Outboard Rubbing Flinger Seal.
7. Lubrication: Grease is Lithium soap type grease with Rust Inhibitors.
8. Welding: Mixed gas shielded arc welding end
9. Painting: Ordinary painting, hot galvanized painting, electric static spraying painting, baked painting
Besides we can manufacture the rollers and idlers according to the buyers’ requirements

 

Certifications

FAQ

1. who are we?
We are based in ZheJiang , China, start from 2005,sell to Mid East(64.00%),Eastern Asia(16.00%),South America(7.00%),Southeast Asia(7.00%),Africa(6.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Belt Conveyor,Conveyor Spare Parts,Conveyor Pulley,roller brackets,belts

4. why should you buy from us not from other suppliers?
We have a professional team with rich experience in conveyor industry at CZPT Our team will provide first-class service to you.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Russian

 

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
Installation: Turning
Keyword: Drum Conveyor Pulley
Warranty: 1 Year
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

pulley

Three basic types of pulleys, their applications and ideal mechanical advantages

There are three basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the three basic types, it is time to understand their applications and ideal mechanical advantages.

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and one side of the rope to lift the load. The load is attached to one end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is two to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are three common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you’re not sure which type to choose, you can find more resources online.
pulley

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, one can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of two pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to one end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.
pulley

cost

Replacing a tensioner in a car’s engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car’s engine.

China best Mining Belt Conveyor Drive Pulley Drum Pulley with SGS   engine pulleyChina best Mining Belt Conveyor Drive Pulley Drum Pulley with SGS   engine pulley
editor by CX

2023-05-26